how to adjust draw weight on a pse bow

Draw weight is the necessary strength, in pounds, needed to bring the compound bow to full depict. Shooting the proper poundage is very important so that required kinetic energy needed is met without sacrificing proper shooting class.

Before adjusting your  poundage, the limbs may be "locked" into their current position by locking bolts. These would exist located simply below the top limb or above the bottom limb and are screwed into the riser. To adapt the limb bolts, these bolts must be loosened first. After adjustment, they tin can so once again be tightened.

To adjust the draw weight, we take to unload or load more stress (flex) on the limbs; we practise that past tightening or loosening the limb bolts.

To enhance draw weight to maximum poundage, tighten the limb bolts (clockwise) until both limbs are tight against the riser.

To lower the draw weight we unscrew the limb bolts equally on each limb (counterclockwise).

Rubber Precaution: Be careful that yous do non unscrew the limb bolts passed the bow'south lowest weight setting. If the limb bolts are unscrewed too much, the limb commodities's threads can come out of the riser and crusade impairment to the bow and injure the mechanic.

Every bow'southward limbs have a specific describe weight rating: 50-sixty, threescore-lxx, 70-fourscore, etc. To check to see if a bow is in "spec" (at its specified manufacturer's measurements) tighten (clockwise) the limb bolts until the limbs are confronting the riser. The bow will now be at the maximum poundage and maximum draw weight, ATA measurement, and brace height measurement can be verified.

To raise draw weight

Tighten the limb bolts until the limbs are tight to the riser.

To lower draw weight

First, enhance the cartoon weight to its max. Next, unscrew both limb bolts one revolution (360°) and check the poundage on a bow scale. Repeat this process until you reach your desired describe weight. Only attempt to shoot draw weights in the limb's specified range (50-60 lbs, 60-seventy lbs). If they are non marked, max out the describe weight and your everyman draw weight will exist 10 lbs lighter in most cases. When using a bow calibration, hook the string to the calibration'southward hook at the nocking indicate and pull down on your bow's riser until your bow is at it's "roll over" spot on the cams and look at the scale for its draw weight. Try not to whorl the cam(south) over, but if you practise, make sure y'all continue a practiced grip when raising the bow back upwardly to accept it off the scale… it'll endeavour to have you for a ride!

How To Find Your Platonic Draw Weight

To find your ideal poundage, sit down down on a chair or tailgate of a truck and pull your bow back with your anxiety off the ground. If you are comfortable with the poundage and can agree full draw comfortably, the poundage is where you demand it. If the poundage seems high (it was tough to pull dorsum and hold) lower the draw weight in 2 lb increments until you have found a comfortable describe weight.

Average draw weights

• Smaller children (45-65 lbs) = 10-20lbs
• Children (65-95 lbs) = 20-35lbs
• Women and boys (95-125 lbs) = 35-45 lbs
• Larger women and boys (125-145 lbs) = 45-55 lbs
• Men (145-175 lbs) = 55-65 lbs
• Muscular men = sixty-70 lbs
• Muscular barbarians = 70-100 lbs

Although these are average drawing weights, information technology is important to shoot what is comfortable for you. Any attempt to draw more than weight than you should will result in improper archery form and affect accurateness.

Source: https://shootingtime.com/archery/adjust-draw-weight/

Posted by: presleynant1976.blogspot.com

Share this post